RCGTEST: version 5 has some failures in the RCG autotest (x2ats) system
The latest source for version 5 was tested on Friday April 22. (branch build_reorg_follow_on)
Version 5 fails a few tests that
-
RCG Simulink parts: failed product and divide (same part)? 4.2.8 passes this test.(broken test. fixed) -
DACKILL, dkt sei timers set to 0. Should be 30. 4.2.8 is failed, but is set 1, not 0. This may have to do with timing of the test, since in some other results both sus and sei timers were 0.
-
RCG Core multiple loopback times are zero, which either means instantaneous detection of the signal, or signal never detected. 4.2.8 shows one loopback time is zero. I had thought loopback hardware is faulty/not installed correctly, but the greater number of zeros in v5 makes me second guess that.
-
RCG Core ADC module state incorrect on at least one ADC (report does not say which). Should be 15 but is 27. 4.2.8 passes. Also, target number given seems to be wrong.
-
Standard filter module test at 30 Hz passes, but seems to fail intermittently in repeated tests. This may also be true for 4.2.8.