cdsFilt.md

@@ -24,9 +24,9 @@ Generally speaking the `cdsFilt*` blocks take a floating point value as input th
 | `_OUT16`    | The latest value of the filter, after all processing and filtered/decimated to 16 Hz. TODO: Add filter description (OUT on medm) | 16 Hz |
 | `_OUTPUT`   | The latest value of the filter, after all processing, taking into account filter output setting. `_OUTMON` will always have the calculated output, this channel will be 0 if the module's output is configured to be off. | 16 Hz |
 | `_SW1R`   | Filter switch selections readback, lower 16 bits. [bitmap](cdsFilter*-Switch-(SW)-Settings) | 16 Hz  |
-| `_SW1R`   | Filter switch selections readback, upper 16 bits. [bitmap](cdsFilter*-Switch-(SW)-Settings) | 16 Hz  |
-| `_SW1S`   |  | 16 Hz  |
-| `_SW1S`   |  | 16 Hz  |
+| `_SW2R`   | Filter switch selections readback, upper 16 bits. [bitmap](cdsFilter*-Switch-(SW)-Settings) | 16 Hz  |
+| `_SW1S`   | The momentary _SW1/2 channels are not good for SDF management, because there state is not sticky. These _SW1/2***S*** versions are sticky and can also be used to command state changes for filter modules. This has the same bitmap as the [_SW1/2](cdsFilter*-Switch-(SW)-Settings) versions.  | 16 Hz  |
+| `_SW2S`   | See function above.  | 16 Hz  |
 | `_Name00` - `_Name09` | The names of the individual filters, set when coefficients are loaded from the filter file. | 16 Hz  |
 
 ### DAQ Capable Fast Channels