SHELL := /bin/bash # Use bash syntax
#
# To run: make env.sh, then source the resulting environment file and run: make
#
# example command:
# make env.sh -f Makefile.ligosoftware_icc_all
# source env.sh
# time make gstlal -f Makefile.ligosoftware_icc_all 1> make.out 2> make.err
#
# If you would like to rebuild only part of the software stack, such as lalsuite
# or gstlal up, but it starts from the beginning if using the above command,
# then use the touch (-t) option on the previous package.
#
# To rebuild lalsuite:
# make gds -f Makefile.ligosoftware_icc_all -t
# make lalsuite -f Makefile.ligosoftware_icc_all
#
# To rebuild gstlal:
# make glue -f Makefile.ligosoftware_icc_all -t
# make gstlal -f Makefile.ligosoftware_icc_all

# Determine cluster
CLUSTER:=$(shell hostname -d)

# Set directories and paths
SRC_DIR:=${PWD}/src
TAR_DIR:=tarball
LOGS_DIR:=${PWD}/logs
PATCH_DIR:=${PWD}/patches
INSTALL_DIR:=${LAL_PATH}
ifeq ($(findstring debian,$(shell cat /etc/os-release | grep ID=)),debian)
	PYTHON_LIB_DIR:=/usr/lib/python2.7/config-x86_64-linux-gnu
	PYTHON_DIR:=${LAL_PATH}/lib/python2.7/site-packages
else
	PYTHON_LIB_DIR:=/usr/lib64
	PYTHON_DIR:=${LAL_PATH}/lib64/python2.7/site-packages
endif

GSTLAL_REPO:=${PWD}/git/gstlal
LIGOSCALD_REPO:=${PWD}/git/ligo-scald
LALSUITE_REPO:=${PWD}/git/lalsuite

# Set to build from git (0 = tarball, 1 = git)
GSTLAL_GIT=1
LIGOSCALD_GIT=0
LALSUITE_GIT=0

# Define which branch from git to build. Defaults to 'master', but the user can
# set the variable below. The git clone and compilation should fail if this is set to
# an unknown branch.
#
GSTLAL_GIT_BRANCH="master"
LIGOSCALD_GIT_BRANCH="master"
LALSUITE_GIT_BRANCH="master"

# Set package release versions
GSTLALINSPIRAL=gstlal-inspiral-1.6.5
GSTLALCALIBRATION=gstlal-calibration-1.2.10
GSTLALBURST=gstlal-burst-0.1.1
GSTLALUGLY=gstlal-ugly-1.6.4
GSTLAL=gstlal-1.5.0
LIGOSCALD=ligo-scald-0.4.1
KAFKA_PYTHON=0.11.5
LIBRDKAFKA=0.11.5
LALAPPS=lalapps-6.24.0
LALINFERENCE=lalinference-1.11.0
LALPULSAR=lalpulsar-1.18.0
LALINSPIRAL=lalinspiral-1.9.0
LALBURST=lalburst-1.5.2
LALSIMULATION=lalsimulation-1.9.0
LALMETAIO=lalmetaio-1.5.1
LALFRAME=lalframe-1.4.5
LAL=lal-6.20.1
GDS=gds-2.18.17
LDASTOOLSFRAMECPP=ldas-tools-framecpp-2.6.5
LDASTOOLSAL=ldas-tools-al-2.6.2
SWIG=swig-3.0.7
METAIO=metaio-8.5.1
LIBFRAME=libframe-8.30
GSTPYTHON=gst-python-1.14.3
GSTPLUGINSGOOD=gst-plugins-good-1.14.3
GSTPLUGINSBASE=gst-plugins-base-1.14.3
GSTREAMER=gstreamer-1.14.3
GSL=gsl-1.16
ORC=orc-0.4.26
FFTW=fftw-3.3.8

# Specify target/dependency files
GSTINSPIRAL_TARGET=$(INSTALL_DIR)/lib/libgstlalinspiral.so
GSTLALCALIB_TARGET=$(INSTALL_DIR)/bin/gstlal_compute_strain
GSTLALBURST_TARGET=$(INSTALL_DIR)/lib/libgstlalburst.so
GSTLALUGLY_TARGET=$(INSTALL_DIR)/lib/gstreamer-1.0/libgstnds.so
GSTLAL_TARGET=$(INSTALL_DIR)/lib/libgstlal.so
LIGOSCALD_TARGET=$(INSTALL_DIR)/lib/python2.7/site-packages/$(LIGOSCALD)-py2.7.egg
KAFKA_PYTHON_TARGET=$(PYTHON_DIR)/confluent_kafka-$(KAFKA_PYTHON)-py2.7-linux-x86_64.egg
LIBRDKAFKA_TARGET=$(INSTALL_DIR)/lib/librdkafka.so
LALAPPS_TARGET=$(INSTALL_DIR)/bin/lalapps_psinject
LALINFER_TARGET=$(INSTALL_DIR)/lib/liblalinference.so
LALPULSAR_TARGET=$(INSTALL_DIR)/lib/liblalpulsar.so
LALINSPIRAL_TARGET=$(INSTALL_DIR)/lib/liblalinspiral.so
LALBURST_TARGET=$(INSTALL_DIR)/lib/liblalburst.so
LALSIM_TARGET=$(INSTALL_DIR)/lib/liblalsimulation.so
LALMETAIO_TARGET=$(INSTALL_DIR)/lib/liblalmetaio.so
LALFRAME_TARGET=$(INSTALL_DIR)/lib/liblalframe.so
LAL_TARGET=$(INSTALL_DIR)/lib/liblal.so
GDS_TARGET=$(INSTALL_DIR)/lib/libwpipe.so
LDASTOOLSFRAMECPP_TARGET=$(INSTALL_DIR)/lib/libframecpp.so
LDASTOOLSAL_TARGET=$(INSTALL_DIR)/lib/libldastoolsal.so
SWIG_TARGET=$(INSTALL_DIR)/bin/swig
METAIO_TARGET=$(INSTALL_DIR)/lib/libmetaio.so
LIBFRAME_TARGET=$(INSTALL_DIR)/lib/libFrame.so
GSTPYTHON_TARGET=$(INSTALL_DIR)/lib/gstreamer-1.0/libgstpython.so
GSTGOOD_TARGET=$(INSTALL_DIR)/lib/gstreamer-1.0/libgstpng.so
GSTBASE_TARGET=$(INSTALL_DIR)/lib/libgstapp-1.0.so
GSTREAMER_TARGET=$(INSTALL_DIR)/lib/libgstreamer-1.0.so
GSL_2_TARGET=$(INSTALL_DIR)/lib/pkgconfig/gsl.pc.orig
GSL_1_TARGET=$(INSTALL_DIR)/lib/libgsl.so
ORC_TARGET=$(INSTALL_DIR)/lib/liborc-0.4.so
FFTW_TARGET=$(INSTALL_DIR)/lib/libfftw3.so

# tarballs
GSTLALINSPIRAL_TAR_TARGET=$(TAR_DIR)/$(GSTLALINSPIRAL).tar.gz
GSTLALCALIB_TAR_TARGET=$(TAR_DIR)/$(GSTLALCALIBRATION).tar.gz
GSTLALBURST_TAR_TARGET=$(TAR_DIR)/$(GSTLALBURST).tar.gz
GSTLALUGLY_TAR_TARGET=$(TAR_DIR)/$(GSTLALUGLY).tar.gz
GSTLAL_TAR_TARGET=$(TAR_DIR)/$(GSTLAL).tar.gz
LIGOSCALD_TAR_TARGET=$(TAR_DIR)/$(LIGOSCALD).tar.gz
KAFKA_PYTHON_TAR_TARGET=$(TAR_DIR)/confluent-kafka-python-$(KAFKA_PYTHON).tar.gz
LIBRDKAFKA_TAR_TARGET=$(TAR_DIR)/librdkafka-$(LIBRDKAFKA).tar.gz
LALAPPS_TAR_TARGET=$(TAR_DIR)/$(LALAPPS).tar.xz
LALINFER_TAR_TARGET=$(TAR_DIR)/$(LALINFERENCE).tar.xz
LALPULSAR_TAR_TARGET=$(TAR_DIR)/$(LALPULSAR).tar.xz
LALINSPIRAL_TAR_TARGET=$(TAR_DIR)/$(LALINSPIRAL).tar.xz
LALBURST_TAR_TARGET=$(TAR_DIR)/$(LALBURST).tar.xz
LALSIM_TAR_TARGET=$(TAR_DIR)/$(LALSIMULATION).tar.xz
LALMETAIO_TAR_TARGET=$(TAR_DIR)/$(LALMETAIO).tar.xz
LALFRAME_TAR_TARGET=$(TAR_DIR)/$(LALFRAME).tar.xz
LAL_TAR_TARGET=$(TAR_DIR)/$(LAL).tar.xz
GDS_TAR_TARGET=$(TAR_DIR)/$(GDS).tar.gz
LDASTOOLSFRAMECPP_TAR_TARGET=$(TAR_DIR)/$(LDASTOOLSFRAMECPP).tar.gz
LDASTOOLSAL_TAR_TARGET=$(TAR_DIR)/$(LDASTOOLSAL).tar.gz
SWIG_TAR_TARGET=$(TAR_DIR)/$(SWIG).tar.gz
METAIO_TAR_TARGET=$(TAR_DIR)/$(METAIO).tar.gz
LIBFRAME_TAR_TARGET=$(TAR_DIR)/$(LIBFRAME).tar.gz
GSTPYTHON_TAR_TARGET=$(TAR_DIR)/$(GSTPYTHON).tar.xz
GSTGOOD_TAR_TARGET=$(TAR_DIR)/$(GSTPLUGINSGOOD).tar.xz
GSTBASE_TAR_TARGET=$(TAR_DIR)/$(GSTPLUGINSBASE).tar.xz
GSTREAMER_TAR_TARGET=$(TAR_DIR)/$(GSTREAMER).tar.xz
GSL_TAR_TARGET=$(TAR_DIR)/$(GSL).tar.gz
ORC_TAR_TARGET=$(TAR_DIR)/$(ORC).tar.xz
FFTW_TAR_TARGET=$(TAR_DIR)/$(FFTW).tar.gz

# git repos
GSTLAL_GIT_TARGET=$(GSTLAL_REPO)/TODO.md
LIGOSCALD_GIT_TARGET=$(LIGOSCALD_REPO)/README.md
LIGOSEGMENTS_GIT_TARGET=$(LIGOSEGMENTS_REPO)/README.rst
PYTHONLIGOLW_GIT_TARGET=$(PYTHONLIGOLW_REPO)/MANIFEST.in
GLUE_GIT_TARGET=$(GLUE_REPO)/README
LALSUITE_GIT_TARGET=$(LALSUITE_REPO)/lal/README

# Specify how many processors to run on
#CORES:=$(shell echo `nproc --all`"-2" | bc -l)
CORES:=8

# Escape code
esc=`echo -en "\033"`

# Set colors
RED="${esc}[0;31m"
GREEN="${esc}[0;32m"
YELLOW="${esc}[0;33m"
BLUE="${esc}[0;34m"
WHITE="${esc}[m"

# icc compiler locations
ICC_CIT:=/ldcg/intel/2018u3/bin/compilervars.sh
ICC_LHO:=/ldcg/intel/2018u3/bin/compilervars.sh
ICC_LLO:=/ldcg/intel/2018u3/bin/compilervars.sh
ICC_UWM:=/opt/intel/2018u3/bin/compilervars.sh
ICC_PSU:=/ligo/apps/intel/2017u4/bin/compilervars.sh

all : $(GSTINSPIRAL_TARGET) $(LOGS_DIR)/gstlal.txt

#####################
# Environment setup #
#####################

env.sh :
	@echo 'unset GST_PLUGIN_PATH PYTHONPATH' > $@
	@echo 'unset LD_LIBRARY_PATH LIBRARY_PATH LD_PRELOAD' >> $@
	@echo 'LAL_PATH=${PWD}/opt' >> $@
	@echo 'export CFLAGS="-O3 -march=native -lfftw3 -lfftw3f -lfftw3_threads -lfftw3f_threads -lmkl_core -lmkl_intel_lp64 -lmkl_sequential -lm -lpthread -Wno-write-strings -lirc -limf -Wl,-rpath,${PWD}/opt/lib"' >> $@
	@echo 'export GCCFLAGS="-fPIC -O3 -march=native"' >> $@
	@if [[ ${CLUSTER} == *"ligo.caltech.edu" ]] ; then \
		echo "source ${ICC_CIT} intel64" >> $@ ; \
		echo 'LDFLAGS_INTEL="-L$${MKLROOT}/lib/intel64"' >> $@ ; \
	elif [[ ${CLUSTER} == *"ligo-wa.caltech.edu" ]] ; then \
		echo "source ${ICC_LHO} intel64" >> $@ ; \
		echo 'LDFLAGS_INTEL="-L$${MKLROOT}/lib/intel64"' >> $@ ; \
	elif [[ ${CLUSTER} == *"ligo-la.caltech.edu" ]] ; then \
		echo "source ${ICC_LLO} intel64" >> $@ ; \
		echo 'LDFLAGS_INTEL="-L$${MKLROOT}/lib/intel64"' >> $@ ; \
	elif [[ ${CLUSTER} == *"nemo.uwm.edu" ]] ; then \
		echo "source ${ICC_UWM} intel64" >> $@ ; \
		echo 'LDFLAGS_INTEL="-L$${MKLROOT}/lib/intel64"' >> $@ ; \
        elif [[ ${CLUSTER} == *"psu.edu" ]] ; then \
		echo "source ${ICC_PSU} intel64" >> $@ ; \
		echo 'export LIBRARY_PATH=$${LD_LIBRARY_PATH}' >> $@ ; \
		echo 'LDFLAGS_INTEL="-L$${MKLROOT}/lib/intel64"' >> $@ ; \
	fi
	@echo 'export LD_LIBRARY_PATH=$${LAL_PATH}/lib:$${LD_LIBRARY_PATH}' >> $@
	@echo 'export CC="icc"' >> $@
	@echo 'export CXX="icpc"' >> $@
	@echo '# Force explicit linking of optimized FFTW libraries:' >> $@
	@echo 'LDFLAGS="$${LDFLAGS_INTEL} -L${PWD}/opt/lib "' >> $@
	@echo '# These are environment variables that do get exported' >> $@
	@echo 'PATH=$${LAL_PATH}/bin:$${PATH}' >> $@
	@echo 'PKG_CONFIG_PATH=$${LAL_PATH}/lib/pkgconfig:$${LAL_PATH}/lib64/pkgconfig:$${PKG_CONFIG_PATH}' >> $@
	@echo 'PYTHONPATH=$${LAL_PATH}/lib/python2.7/site-packages:$${LAL_PATH}/lib64/python2.7/site-packages' >> $@
	@echo 'GST_PLUGIN_PATH=$${LAL_PATH}/lib/gstreamer-1.0:$${LAL_PATH}/lib64/gstreamer-1.0' >> $@
	@echo 'GI_TYPELIB_PATH=$${LAL_PATH}/lib/girepository-1.0:$${LAL_PATH}/lib64/girepository-1.0:$${GI_TYPELIB_PATH}' >> $@
	@echo 'GST_REGISTRY_1_0=$${LAL_PATH}/registry.bin' >> $@
	@echo 'LAL_DATA_PATH=/home/cbc/ROM_data' >> $@
	@echo 'KAFKA_JVM_PERFORMANCE_OPTS="-server -XX:MetaspaceSize=96m -XX:+UseG1GC -XX:MaxGCPauseMillis=20 -XX:InitiatingHeapOccupancyPercent=35 -XX:G1HeapRegionSize=16M -XX:MinMetaspaceFreeRatio=50 -XX:MaxMetaspaceFreeRatio=80"' >> $@
	@echo 'KAFKA_HEAP_OPTS="-Xms8G -Xmx8G"' >> $@
	@echo 'GSTLAL_FIR_WHITEN=0' >> $@
	@echo 'GSTLAL_WEBVIS_DIR=$${LAL_PATH}/share/gstlal' >> $@
	@echo 'export LAL_PATH LDFLAGS_INTEL LDFLAGS PATH PKG_CONFIG_PATH PYTHONPATH GST_PLUGIN_PATH GI_TYPELIB_PATH GST_REGISTRY_1_0 LAL_DATA_PATH KAFKA_JVM_PERFORMANCE_OPTS KAFKA_HEAP_OPTS GSTLAL_FIR_WHITEN GSTLAL_WEBVIS_DIR' >> $@

###########
# Install #
###########

# gstlal (all)
gstlal : $(LOGS_DIR)/gstlal.txt src/kafka_2.11-2.0.0

all : src/kafka_2.11-2.0.0

src:
	mkdir -p $@

opt/bin:
	mkdir -p $@/bin

opt/config:
	mkdir -p $@/config

opt/libs:
	mkdir -p $@/libs

tarball:
	mkdir -p $@

# KAFKA
tarball/kafka_2.11-2.0.0.tgz: tarball
	wget -nc -P tarball https://archive.apache.org/dist/kafka/2.0.0/kafka_2.11-2.0.0.tgz

src/kafka_2.11-2.0.0: tarball/kafka_2.11-2.0.0.tgz src opt/bin opt/config opt/libs
	cd src && tar -xzf ../tarball/kafka_2.11-2.0.0.tgz && cd .. && cp -r src/kafka_2.11-2.0.0/bin/* opt/bin/. && cp src/kafka_2.11-2.0.0/libs/* opt/libs/. && cp src/kafka_2.11-2.0.0/config/* opt/config/.


#####################
# Check time stamps #
#####################

check :
	@if [ -f $(LOGS_DIR)/all.txt ] ; then rm $(LOGS_DIR)/all.txt ; fi ;
	@cat $(LOGS_DIR)/* | uniq > $(LOGS_DIR)/all.txt
	@if [ -f $(LOGS_DIR)/gstlal.txt ] ; then ls $(LOGS_DIR)/gstlal.txt >> $(LOGS_DIR)/all.txt ; fi ;
	@ls -ltrh $$(cat $(LOGS_DIR)/all.txt)

$(LOGS_DIR)/gstlal.txt : $(LOGS_DIR)/ligo-scald.txt $(GSTLAL_TARGET) $(GSTLALUGLY_TARGET) $(GSTLALBURST_TARGET) $(GSTLALCALIB_TARGET) $(GSTINSPIRAL_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

# gstlal-inspiral
$(GSTINSPIRAL_TARGET) : $(GSTLALCALIB_TARGET)
	@echo $(GREEN)gstlal-inspiral$(WHITE) 1>&2
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		cd $(GSTLAL_REPO)/gstlal-inspiral && echo | ./00init.sh ; \
		cd $(GSTLAL_REPO)/gstlal-inspiral && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(GSTLAL_REPO)/gstlal-inspiral && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xzkf $(TAR_DIR)/$(GSTLALINSPIRAL).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(GSTLALINSPIRAL) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen --disable-massmodel ; \
		cd $(SRC_DIR)/$(GSTLALINSPIRAL) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# gstlal-calibration
$(GSTLALCALIB_TARGET) : $(GSTLALBURST_TARGET)
	@echo $(GREEN)gstlal-calibration$(WHITE) 1>&2
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		cd $(GSTLAL_REPO)/gstlal-calibration && echo | ./00init.sh ; \
		cd $(GSTLAL_REPO)/gstlal-calibration && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(GSTLAL_REPO)/gstlal-calibration && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xzkf $(TAR_DIR)/$(GSTLALCALIBRATION).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(GSTLALCALIBRATION) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(SRC_DIR)/$(GSTLALCALIBRATION) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# gstlal-burst
$(GSTLALBURST_TARGET) : $(GSTLALUGLY_TARGET)
	@echo $(GREEN)gstlal-burst$(WHITE) 1>&2
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		cd $(GSTLAL_REPO)/gstlal-burst && echo | ./00init.sh ; \
		cd $(GSTLAL_REPO)/gstlal-burst && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(GSTLAL_REPO)/gstlal-burst && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xzkf $(TAR_DIR)/$(GSTLALBURST).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(GSTLALBURST) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(SRC_DIR)/$(GSTLALBURST) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# gstlal-ugly
$(GSTLALUGLY_TARGET) : $(GSTLAL_TARGET)
	@echo $(GREEN)gstlal-ugly$(WHITE) 1>&2
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		cd $(GSTLAL_REPO)/gstlal-ugly && echo | ./00init.sh ; \
		cd $(GSTLAL_REPO)/gstlal-ugly && ./configure --prefix=$(INSTALL_DIR) --without-doxygen --with-webdir=$(GSTLAL_WEBVIS_DIR) ; \
		cd $(GSTLAL_REPO)/gstlal-ugly && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xzkf $(TAR_DIR)/$(GSTLALUGLY).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(GSTLALUGLY) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen --with-webdir=$(GSTLAL_WEBVIS_DIR) ; \
		cd $(SRC_DIR)/$(GSTLALUGLY) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# gstlal
$(GSTLAL_TARGET) : $(LIGOSCALD_TARGET)
	@echo $(GREEN)gstlal$(WHITE) 1>&2
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		cd $(GSTLAL_REPO)/gstlal && echo | ./00init.sh ; \
		cd $(GSTLAL_REPO)/gstlal && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(GSTLAL_REPO)/gstlal && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xzkf $(TAR_DIR)/$(GSTLAL).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(GSTLAL) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(SRC_DIR)/$(GSTLAL) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# ligo-scald
ligo-scald : $(LOGS_DIR)/ligo-scald.txt

$(LOGS_DIR)/ligo-scald.txt : $(LOGS_DIR)/kafka-python.txt $(LIGOSCALD_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

#$(LIGOSCALD_TARGET) : $(LIGOSEGMENTS_TARGET)
$(LIGOSCALD_TARGET) : $(KAFKA_PYTHON_TARGET)
	@echo $(GREEN)ligo-scald$(WHITE) 1>&2
	if [ "${LIGOSCALD_GIT}" = "1" ]; then \
		cd $(LIGOSCALD_REPO) && python setup.py install --prefix=$(INSTALL_DIR) ; \
	else \
		tar -xzf $(TAR_DIR)/$(LIGOSCALD).tar.gz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LIGOSCALD) && python setup.py install --prefix=$(INSTALL_DIR) ; \
	fi ;

# confluent-kafka-python
kafka-python : $(LOGS_DIR)/kafka-python.txt

$(LOGS_DIR)/kafka-python.txt : $(LOGS_DIR)/librdkafka.txt $(KAFKA_PYTHON_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(KAFKA_PYTHON_TARGET) : $(LIBRDKAFKA_TARGET)
	@echo $(GREEN)kafka-python$(WHITE) 1>&2
	tar -xzf $(TAR_DIR)/confluent-kafka-python-$(KAFKA_PYTHON).tar.gz -C $(SRC_DIR) ; \
	cd $(SRC_DIR)/confluent-kafka-python-$(KAFKA_PYTHON) && CFLAGS="$(GCCFLAGS)" C_INCLUDE_PATH=$(INSTALL_DIR)/include LIBRARY_PATH=$(INSTALL_DIR)/lib python setup.py install --prefix=$(INSTALL_DIR) ; \

# librdkafka
librdkafka : $(LOGS_DIR)/librdkafka.txt

$(LOGS_DIR)/librdkafka.txt : $(LOGS_DIR)/lalsuite.txt $(LIBRDKAFKA_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(LIBRDKAFKA_TARGET) : $(LALAPPS_TARGET)
	@echo $(GREEN)librdkafka$(WHITE) 1>&2
	tar -xzf $(TAR_DIR)/librdkafka-$(LIBRDKAFKA).tar.gz -C $(SRC_DIR) ; \
	cd $(SRC_DIR)/librdkafka-$(LIBRDKAFKA) && ./configure --prefix=$(INSTALL_DIR) ; \
	cd $(SRC_DIR)/librdkafka-$(LIBRDKAFKA) && make -j$(CORES) && make install -j$(CORES) ; \

# lalsuite
lalsuite : $(LOGS_DIR)/lalsuite.txt

$(LOGS_DIR)/lalsuite.txt : $(LOGS_DIR)/gds.txt $(LAL_TARGET) $(LALFRAME_TARGET) $(LALMETAIO_TARGET) $(LALSIM_TARGET) $(LALBURST_TARGET) $(LALINSPIRAL_TARGET) $(LALPULSAR_TARGET) $(LALINFER_TARGET) $(LALAPPS_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

# lalapps
# FIXME --enable-gcc-flags set to no on lalapps configure as work around to avoid warnings stopping install process
# FIXME : Commenting out the explicit linking to gslcblas
# Not sure what causes the warnings
$(LALAPPS_TARGET) : $(LALINFER_TARGET)
	@echo $(GREEN)lalapps$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalapps && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalapps && ./00boot ; \
		cd $(LALSUITE_REPO)/lalapps && ./configure --enable-gcc-flags=no --enable-swig-python --disable-lalxml --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(LALSUITE_REPO)/lalapps && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALAPPS).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALAPPS) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALAPPS) && ./configure --enable-gcc-flags=no --enable-swig-python --disable-lalxml --prefix=$(INSTALL_DIR) --without-doxygen ; \
		cd $(SRC_DIR)/$(LALAPPS) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalinference
$(LALINFER_TARGET) : $(LALPULSAR_TARGET)
	@echo $(GREEN)lalinference$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalapps && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalinference && ./00boot ; \
		cd $(LALSUITE_REPO)/lalinference && ./configure --enable-swig-python --disable-lalxml --without-doxygen --prefix=$(INSTALL_DIR)  CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)" ; \
		cd $(LALSUITE_REPO)/lalinference && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALINFERENCE).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALINFERENCE) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALINFERENCE) && ./configure --enable-swig-python --disable-lalxml --without-doxygen --prefix=$(INSTALL_DIR)  CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)" ; \
		cd $(SRC_DIR)/$(LALINFERENCE) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalpulsar
$(LALPULSAR_TARGET) : $(LALINSPIRAL_TARGET)
	@echo $(GREEN)lalpulsar$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalapps && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalpulsar && ./00boot ; \
		cd $(LALSUITE_REPO)/lalpulsar && ./configure --enable-swig-python --disable-lalxml --without-doxygen --prefix=$(INSTALL_DIR)  CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)" ; \
		cd $(LALSUITE_REPO)/lalpulsar && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALPULSAR).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALPULSAR) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALPULSAR) && ./configure --enable-swig-python --disable-lalxml --without-doxygen --prefix=$(INSTALL_DIR)  CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)" ; \
		cd $(SRC_DIR)/$(LALPULSAR) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalinspiral
$(LALINSPIRAL_TARGET) : $(LALBURST_TARGET)
	@echo $(GREEN)lalinspiral$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalinspiral && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalinspiral && ./00boot ; \
		cd $(LALSUITE_REPO)/lalinspiral && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(LALSUITE_REPO)/lalinspiral && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALINSPIRAL).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALINSPIRAL) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALINSPIRAL) && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(SRC_DIR)/$(LALINSPIRAL) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalburst
$(LALBURST_TARGET) : $(LALSIM_TARGET)
	@echo $(GREEN)lalburst$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalburst && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalburst && ./00boot ; \
		cd $(LALSUITE_REPO)/lalburst && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(LALSUITE_REPO)/lalburst && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALBURST).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALBURST) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALBURST) && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(SRC_DIR)/$(LALBURST) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalsimulation
$(LALSIM_TARGET) : $(LALMETAIO_TARGET)
	@echo $(GREEN)lalsimulation$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalsimulation && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalsimulation && ./00boot ; \
		cd $(LALSUITE_REPO)/lalsimulation && ./configure --disable-openmp --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) CFLAGS="$(CFLAGS) -lmkl_def" ; \
		cd $(LALSUITE_REPO)/lalsimulation && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALSIMULATION).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALSIMULATION) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALSIMULATION) && ./configure --disable-openmp --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) CFLAGS="$(CFLAGS) -lmkl_def" ; \
		cd $(SRC_DIR)/$(LALSIMULATION) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalmetaio
$(LALMETAIO_TARGET) : $(LALFRAME_TARGET)
	@echo $(GREEN)lalmetaio$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalmetaio && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalmetaio && ./00boot ; \
		cd $(LALSUITE_REPO)/lalmetaio && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(LALSUITE_REPO)/lalmetaio && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALMETAIO).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALMETAIO) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALMETAIO) && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(SRC_DIR)/$(LALMETAIO) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lalframe
$(LALFRAME_TARGET) : $(LAL_TARGET)
	@echo $(GREEN)lalframe$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lalframe && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lalframe && ./00boot ; \
		cd $(LALSUITE_REPO)/lalframe && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(LALSUITE_REPO)/lalframe && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LALFRAME).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LALFRAME) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LALFRAME) && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(SRC_DIR)/$(LALFRAME) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# lal
$(LAL_TARGET) : $(LIBFRAME_TARGET) $(METAIO_TARGET) $(SWIG_TARGET) $(LDASTOOLSAL_TARGET)  $(LDASTOOLSFRAMECPP_TARGET) $(GDS_TARGET)
	@echo $(GREEN)lal$(WHITE) 1>&2
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		cd $(LALSUITE_REPO)/lal && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac ; \
		cd $(LALSUITE_REPO)/lal && ./00boot ; \
		cd $(LALSUITE_REPO)/lal && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(LALSUITE_REPO)/lal && make -j$(CORES) && make install -j$(CORES) ; \
	else \
		tar -xf $(TAR_DIR)/$(LAL).tar.xz -C $(SRC_DIR) ; \
		cd $(SRC_DIR)/$(LAL) && sed -i -e 's@AC_CHECK_LIB(\[gslcblas\]@#AC_CHECK_LIB(\[gslcblas\]@g' configure.ac && autoreconf ; \
		cd $(SRC_DIR)/$(LAL) && ./configure --enable-swig-python --without-doxygen --prefix=$(INSTALL_DIR) ; \
		cd $(SRC_DIR)/$(LAL) && make -j$(CORES) && make install -j$(CORES) ; \
	fi ;

# gds
gds : $(LOGS_DIR)/gds.txt

$(LOGS_DIR)/gds.txt : $(LOGS_DIR)/ldas-tools-framecpp.txt $(GDS_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(GDS_TARGET) : $(LDASTOOLSFRAMECPP_TARGET)
	@echo $(GREEN)gds$(WHITE) 1>&2
	tar -xzf $(TAR_DIR)/$(GDS).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GDS) && ./configure --enable-online --prefix=$(INSTALL_DIR) CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS) -lfftw3_threads -lfftw3f_threads"
	cd $(SRC_DIR)/$(GDS) && make -j$(CORES) && make install -j$(CORES)

# ldas-tools-framecpp
ldas-tools-framecpp : $(LOGS_DIR)/ldas-tools-framecpp.txt

$(LOGS_DIR)/ldas-tools-framecpp.txt : $(LOGS_DIR)/ldas-tools-al.txt $(LDASTOOLSFRAMECPP_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(LDASTOOLSFRAMECPP_TARGET) : $(LDASTOOLSAL_TARGET)
	@echo $(GREEN)ldas-tools-frmecpp$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(LDASTOOLSFRAMECPP).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(LDASTOOLSFRAMECPP) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)"
	cd $(SRC_DIR)/$(LDASTOOLSFRAMECPP) && make DESTDIR=/ -j$(CORES) && make install DESTDIR=/ -j$(CORES)

# ldas-tools-al
ldas-tools-al : $(LOGS_DIR)/ldas-tools-al.txt

$(LOGS_DIR)/ldas-tools-al.txt : $(LOGS_DIR)/swig.txt $(LDASTOOLSAL_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(LDASTOOLSAL_TARGET) : $(SWIG_TARGET)
	@echo $(GREEN)ldas-tools-al$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(LDASTOOLSAL).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(LDASTOOLSAL) && ./configure --prefix=$(INSTALL_DIR) --without-doxygen CC="gcc" CXX="g++" CFLAGS="$(GCCFLAGS)"
	cd $(SRC_DIR)/$(LDASTOOLSAL) && make -j$(CORES) && make install -j$(CORES)

# swig
swig : $(LOGS_DIR)/swig.txt

$(LOGS_DIR)/swig.txt : $(LOGS_DIR)/metaio.txt $(SWIG_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(SWIG_TARGET) : $(METAIO_TARGET)
	@echo $(GREEN)swig$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(SWIG).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(SWIG) && ./configure --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(SWIG) && make -j$(CORES) && make install -j$(CORES)

# metaio
metaio : $(LOGS_DIR)/metaio.txt

$(LOGS_DIR)/metaio.txt : $(LOGS_DIR)/libframe.txt $(METAIO_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(METAIO_TARGET) : $(LIBFRAME_TARGET)
	@echo $(GREEN)metaio$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(METAIO).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(METAIO) && ./configure --prefix=$(INSTALL_DIR) --with-matlab=no
	cd $(SRC_DIR)/$(METAIO) && make -j$(CORES) && make install -j$(CORES)
	# Needed with-matlab option for intel_haswell test

# libframe
libframe : $(LOGS_DIR)/libframe.txt

$(LOGS_DIR)/libframe.txt : $(LOGS_DIR)/gstreamer.txt $(LIBFRAME_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(LIBFRAME_TARGET) : $(GSTPYTHON_TARGET)
	@echo $(GREEN)libframe$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(LIBFRAME).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(LIBFRAME) && ./configure --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(LIBFRAME) && make -j$(CORES) && make install -j$(CORES)

# gstreamer (all)
gstreamer : $(LOGS_DIR)/gstreamer.txt

$(LOGS_DIR)/gstreamer.txt : $(LOGS_DIR)/gsl.txt $(GSTREAMER_TARGET) $(GSTBASE_TARGET) $(GSTGOOD_TARGET) $(GSTPYTHON_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

# gstreamer plugin python
$(GSTPYTHON_TARGET) : $(GSTGOOD_TARGET)
	@echo $(GREEN)gst-python$(WHITE) 1>&2
	mkdir -p $(INSTALL_DIR)/lib/python2.7/site-packages/gi/overrides
	tar -xf $(TAR_DIR)/$(GSTPYTHON).tar.xz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GSTPYTHON) && ./configure --prefix=$(INSTALL_DIR) --exec-prefix=$(INSTALL_DIR) --with-libpython-dir=$(PYTHON_LIB_DIR) --with-pygi-overrides-dir=$(INSTALL_DIR)/lib/python2.7/site-packages/gi/overrides
	cd $(SRC_DIR)/$(GSTPYTHON) && make -j$(CORES) && make install -j$(CORES)

# gstreamer plugin good
$(GSTGOOD_TARGET) : $(GSTBASE_TARGET)
	@echo $(GREEN)gst-good$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(GSTPLUGINSGOOD).tar.xz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GSTPLUGINSGOOD) && ./configure --disable-gst_v4l2 --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(GSTPLUGINSGOOD) && make -j$(CORES) && make install -j$(CORES)

# gstreamer plugin base
$(GSTBASE_TARGET) : $(GSTREAMER_TARGET)
	@echo $(GREEN)gst-base$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(GSTPLUGINSBASE).tar.xz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GSTPLUGINSBASE) && ./configure --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(GSTPLUGINSBASE) && make -j$(CORES) && make install -j$(CORES)

# gstreamer
$(GSTREAMER_TARGET) : $(GSL_2_TARGET)
	@echo $(GREEN)gstreamer$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(GSTREAMER).tar.xz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GSTREAMER) && ./configure --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(GSTREAMER) && make -j$(CORES) && make install -j$(CORES)

# GSL
gsl : $(LOGS_DIR)/gsl.txt

$(LOGS_DIR)/gsl.txt : $(LOGS_DIR)/orc.txt $(GSL_1_TARGET) $(GSL_2_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

## FIXME Hack to make gsl default to atlas for blas
$(GSL_2_TARGET) : $(GSL_1_TARGET)
	cp $(INSTALL_DIR)/lib/pkgconfig/gsl.pc $@
	sed 's/-lgslcblas/ -lmkl_intel_ilp64 -lmkl_core -lmkl_sequential -lpthread -lm/' $@ > $(INSTALL_DIR)/lib/pkgconfig/gsl.pc

$(GSL_1_TARGET) : $(ORC_TARGET)
	@echo $(GREEN)gsl$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(GSL).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(GSL) && ./configure --prefix=$(INSTALL_DIR) CFLAGS="${CFLAGS}" CC="icc" CXX="icpc" GSL_CBLAS_LIB='-lmkl_intel_ilp64 -lmkl_core -lmkl_sequential'
	cd $(SRC_DIR)/$(GSL) && make -j$(CORES) && make install -j$(CORES)

# ORC
orc : $(LOGS_DIR)/orc.txt

$(LOGS_DIR)/orc.txt : $(LOGS_DIR)/fftw.txt $(ORC_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

$(ORC_TARGET) : $(FFTW_TARGET)
	@echo $(GREEN)orc$(WHITE) 1>&2
	tar -xf $(TAR_DIR)/$(ORC).tar.xz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(ORC) && ./configure --prefix=$(INSTALL_DIR)
	cd $(SRC_DIR)/$(ORC) && make -j$(CORES) && make install -j$(CORES)

# fftw
fftw : $(LOGS_DIR)/fftw.txt

$(LOGS_DIR)/fftw.txt : $(LOGS_DIR)/patch.txt $(FFTW_TARGET)
	@echo $^ | sed -e "s@ @\n@g" > $@

# ./configure, make, make install run thrice to install single and double precision, and long double libs
$(FFTW_TARGET) : $(LOGS_DIR)/patch.txt
	@echo $(GREEN)fftw$(WHITE) 1>&2
	tar -xzf $(TAR_DIR)/$(FFTW).tar.gz -C $(SRC_DIR)
	cd $(SRC_DIR)/$(FFTW) && \
		./configure CFLAGS="-O3 -march=native -lmkl_core -lmkl_intel_lp64 -lmkl_sequential -lm -lpthread -Wno-write-strings -lirc -limf -Wl,-rpath,${PWD}/opt/lib" LDFLAGS="${LDFLAGS_INTEL}" --enable-shared --enable-sse --enable-sse2 --enable-avx --enable-float --enable-fma --enable-avx2 --enable-threads --prefix=$(INSTALL_DIR) && \
		make -j$(CORES) && make install -j$(CORES) && make clean && \
		./configure CFLAGS="-O3 -march=native -lmkl_core -lmkl_intel_lp64 -lmkl_sequential -lm -lpthread -Wno-write-strings -lirc -limf -Wl,-rpath,${PWD}/opt/lib" LDFLAGS="${LDFLAGS_INTEL}" --enable-shared --enable-sse2 --enable-avx --enable-avx --enable-fma --enable-avx2 --enable-threads --prefix=$(INSTALL_DIR) && \
		make -j$(CORES) && make install -j$(CORES) && make clean && \
		./configure CFLAGS="-O3 -march=native -lmkl_core -lmkl_intel_lp64 -lmkl_sequential -lm -lpthread -Wno-write-strings -lirc -limf -Wl,-rpath,${PWD}/opt/lib" LDFLAGS="${LDFLAGS_INTEL}" --enable-shared --enable-fma --enable-threads --enable-long-double --prefix=$(INSTALL_DIR) && \
		make -j$(CORES) && make install -j$(CORES)

#########################
# Download the software #
#########################

# patches
patch : $(LOGS_DIR)/patch.txt

$(LOGS_DIR)/patch.txt : $(LOGS_DIR)/tar.txt
	echo $^ | sed -e "s@ @\n@g" > $@

#tarballs
$(LOGS_DIR)/tar.txt : $(FFTW_TAR_TARGET) $(ORC_TAR_TARGET) $(GSL_TAR_TARGET) $(GSTREAMER_TAR_TARGET) $(GSTBASE_TAR_TARGET) $(GSTGOOD_TAR_TARGET) $(GSTPYTHON_TAR_TARGET) $(LIBFRAME_TAR_TARGET) $(METAIO_TAR_TARGET) $(SWIG_TAR_TARGET) $(LDASTOOLSAL_TAR_TARGET) $(LDASTOOLSFRAMECPP_TAR_TARGET) $(GDS_TAR_TARGET) $(LIBRDKAFKA_TAR_TARGET) $(KAFKA_PYTHON_TAR_TARGET)
	echo $^ | sed -e "s@ @\n@g" > $@

$(KAFKA_PYTHON_TAR_TARGET) : $(LIBRDKAFKA_TAR_TARGET)
	wget --no-check-certificate https://github.com/confluentinc/confluent-kafka-python/archive/v$(KAFKA_PYTHON).tar.gz --directory-prefix=$(TAR_DIR) -O $(TAR_DIR)/confluent-kafka-python-$(KAFKA_PYTHON).tar.gz -nc

$(LIBRDKAFKA_TAR_TARGET) : $(GDS_TAR_TARGET)
	wget --no-check-certificate https://github.com/edenhill/librdkafka/archive/v$(LIBRDKAFKA).tar.gz --directory-prefix=$(TAR_DIR) -O $(TAR_DIR)/librdkafka-$(LIBRDKAFKA).tar.gz -nc

$(GDS_TAR_TARGET) : $(LDASTOOLSFRAMECPP_TAR_TARGET)
	wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GDS).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(LDASTOOLSFRAMECPP_TAR_TARGET) : $(LDASTOOLSAL_TAR_TARGET)
	wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(LDASTOOLSFRAMECPP).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(LDASTOOLSAL_TAR_TARGET) : $(SWIG_TAR_TARGET)
	wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(LDASTOOLSAL).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(SWIG_TAR_TARGET) : $(METAIO_TAR_TARGET)
	wget --no-check-certificate http://downloads.sourceforge.net/project/swig/swig/$(SWIG)/$(SWIG).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(METAIO_TAR_TARGET) : $(LIBFRAME_TAR_TARGET)
	wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(METAIO).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(LIBFRAME_TAR_TARGET) : $(GSTPYTHON_TAR_TARGET)
	wget --no-check-certificate http://lappweb.in2p3.fr/virgo/FrameL/$(LIBFRAME).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(GSTPYTHON_TAR_TARGET) : $(GSTGOOD_TAR_TARGET)
	wget --no-check-certificate http://gstreamer.freedesktop.org/src/gst-python/$(GSTPYTHON).tar.xz --directory-prefix=$(TAR_DIR) -nc

$(GSTGOOD_TAR_TARGET) : $(GSTBASE_TAR_TARGET)
	wget --no-check-certificate http://gstreamer.freedesktop.org/src/gst-plugins-good/$(GSTPLUGINSGOOD).tar.xz --directory-prefix=$(TAR_DIR) -nc

$(GSTBASE_TAR_TARGET) : $(GSTREAMER_TAR_TARGET)
	wget --no-check-certificate http://gstreamer.freedesktop.org/src/gst-plugins-base/$(GSTPLUGINSBASE).tar.xz --directory-prefix=$(TAR_DIR) -nc

$(GSTREAMER_TAR_TARGET) : $(GSL_TAR_TARGET)
	wget --no-check-certificate http://gstreamer.freedesktop.org/src/gstreamer/$(GSTREAMER).tar.xz --directory-prefix=$(TAR_DIR) -nc

$(GSL_TAR_TARGET) : $(ORC_TAR_TARGET)
	wget --no-check-certificate http://ftp.gnu.org/gnu/gsl/$(GSL).tar.gz --directory-prefix=$(TAR_DIR) -nc

$(ORC_TAR_TARGET) : $(FFTW_TAR_TARGET)
	wget --no-check-certificate http://gstreamer.freedesktop.org/src/orc/$(ORC).tar.xz --directory-prefix=$(TAR_DIR) -nc

$(FFTW_TAR_TARGET) : $(LOGS_DIR)
	wget --no-check-certificate http://www.fftw.org/$(FFTW).tar.gz --directory-prefix=$(TAR_DIR) -nc

# git repos
$(LOGS_DIR) :
	mkdir -p $(SRC_DIR) $(INSTALL_DIR) $(PATCH_DIR) $(TAR_DIR) $(PYTHON_DIR)
	if [ "${LALSUITE_GIT}" = "1" ]; then \
		if [ -f $@ ] ; then \
			echo "Lalsuite git repo exists" ; \
		else \
			mkdir -p $(LALSUITE_REPO) ; \
			git clone -b $(LALSUITE_GIT_BRANCH) https://git.ligo.org/lscsoft/lalsuite.git $(LALSUITE_REPO) ; \
		fi ; \
	else \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LAL).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALFRAME).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALMETAIO).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALSIMULATION).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALBURST).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALINSPIRAL).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALPULSAR).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALINFERENCE).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/lalsuite/$(LALAPPS).tar.xz --directory-prefix=$(TAR_DIR) -nc ; \
	fi ;
	if [ "${LIGOSCALD_GIT}" = "1" ]; then \
		if [ -f $@ ] ; then \
			echo "ligo-scald git repo exists" ; \
		else \
			mkdir -p $(LIGOSCALD_REPO) ; \
			git clone -b $(LIGOSCALD_GIT_BRANCH) https://git.ligo.org/gstlal-visualisation/ligo-scald.git $(LIGOSCALD_REPO) ; \
		fi ; \
	else \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(LIGOSCALD).tar.gz --directory-prefix=$(TAR_DIR) -nc ; \
	fi ;
	if [ "${GSTLAL_GIT}" = "1" ]; then \
		if [ -f $@ ] ; then \
			echo "Gstlal git repo exists" ; \
		else \
			mkdir -p $(GSTLAL_REPO) ; \
			git clone -b $(GSTLAL_GIT_BRANCH) https://git.ligo.org/lscsoft/gstlal.git $(GSTLAL_REPO) ; \
		fi ; \
	else \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GSTLAL).tar.gz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GSTLALUGLY).tar.gz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GSTLALBURST).tar.gz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GSTLALCALIBRATION).tar.gz --directory-prefix=$(TAR_DIR) -nc ; \
		wget --no-check-certificate http://software.ligo.org/lscsoft/source/$(GSTLALINSPIRAL).tar.gz --directory-prefix=$(TAR_DIR)  -nc ; \
	fi ;
	mkdir -p $(LOGS_DIR)

############
# Clean up #
############

clean-all :
	rm -rvf $(SRC_DIR) $(INSTALL_DIR) $(PATCH_DIR) $(TAR_DIR) $(LOGS_DIR)
	rm -rvf opt git
	rm -rf *.txt

clean-install :
	rm -rf opt/* $(LOGS_DIR)/* src/*

clean-gstlal :
	rm -rf $(LOGS_DIR)/gstlal.txt $(GSTLAL_TARGET) $(GSTLALUGLY_TARGET) $(GSTLALBURST_TARGET) $(GSTLALCALIB_TARGET) $(GSTLALINSPIRAL_TARGET)

clean-kafka-python :
	rm -rf $(LOGS_DIR)/kafka-python.txt $(KAFKA_PYTHON_TARGET)

clean-librdkafka :
	rm -rf $(LOGS_DIR)/librdkafka.txt $(LIBRDKAFKA_TARGET)

clean-lalsuite :
	rm -rf $(LOGS_DIR)/lalsuite.txt $(LAL_TARGET) $(LALFRAME_TARGET) $(LALMETAIO_TARGET) $(LALSIM_TARGET) $(LALBURST_TARGET) $(LALINSPIRAL_TARGET) $(LALPULSAR_TARGET) $(LALINFER_TARGET) $(LALAPPS_TARGET) $(GLUE_TARGET)

clean-gds :
	rm -rf $(LOGS_DIR)/gds.txt $(GDS_TARGET)

clean-ldas-tools-framecpp :
	rm -rf $(LOGS_DIR)/ldas-tools-framecpp.txt $(LDASTOOLSFRAMECPP_TARGET)

clean-ldas-tools-al :
	rm -rf $(LOGS_DIR)/ldas-tools-al.txt $(LDASTOOLSAL_TARGET)

clean-swig :
	rm -rf $(LOGS_DIR)/swig.txt $(SWIG_TARGET)

clean-metaio :
	rm -rf $(LOGS_DIR)/metaio.txt $(METAIO_TARGET)

clean-libframe :
	rm -rf $(LOGS_DIR)/libframe.txt $(LIBFRAME_TARGET)

clean-gstreamer :
	rm -rf $(LOGS_DIR)/gstreamer.txt $(GSTREAMER_TARGET) $(GSTBASE_TARGET) $(GSTGOOD_TARGET) $(GSTPYTHON_TARGET)

clean-gsl :
	rm -rf $(LOGS_DIR)/gsl.txt $(GSL_1_TARGET) $(GSL_2_TARGET)

clean-orc :
	rm -rf $(LOGS_DIR)/orc.txt $(ORC_TARGET)

clean-fftw :
	rm -rf $(LOGS_DIR)/fftw.txt $(FFTW_TARGET)