diff --git a/bilby/gw/detector/calibration.py b/bilby/gw/detector/calibration.py
index 7c9559a494e7b7a09838b73bd3c793f63b29f5d5..a5811c1ae37f9a9a3523aacd7fe2ef2878a610ac 100644
--- a/bilby/gw/detector/calibration.py
+++ b/bilby/gw/detector/calibration.py
@@ -9,6 +9,7 @@ from scipy.interpolate import interp1d
from ...core.utils.log import logger
from ...core.prior.dict import PriorDict
+from ..prior import CalibrationPriorDict
def read_calibration_file(filename, frequency_array, number_of_response_curves, starting_index=0):
@@ -225,6 +226,108 @@ class CubicSpline(Recalibrate):
return calibration_factor
+class Precomputed(Recalibrate):
+
+ name = "precomputed"
+
+ def __init__(self, label, curves, frequency_array, parameters=None):
+ """
+ A class for accessing an array of precomputed recalibration curves.
+
+ Parameters
+ ==========
+ label: str
+ The label for the interferometer, e.g., H1. The corresponding
+ parameter is :code:`recalib_index_{label}`.
+ curves: array-like
+ Array with shape (n_curves, n_frequencies) with the recalibration
+ curves.
+ frequency_array: array-like
+ Array of frequencies at which the curves are evaluated.
+ """
+ self.label = label
+ self.curves = curves
+ self.frequency_array = frequency_array
+ self.parameters = parameters
+ super(Precomputed, self).__init__(prefix=f"recalib_index_{self.label}")
+
+ def get_calibration_factor(self, frequency_array, **params):
+ idx = int(params.get(self.prefix, None))
+ if idx is None:
+ raise KeyError(f"Calibration index for {self.label} not found.")
+ if not np.array_equal(frequency_array, self.frequency_array):
+ raise ValueError("Frequency grid passed to calibrator doesn't match.")
+ return self.curves[idx]
+
+ @classmethod
+ def constant_uncertainty_spline(
+ cls, amplitude_sigma, phase_sigma, frequency_array, n_nodes, label, n_curves
+ ):
+ priors = CalibrationPriorDict.constant_uncertainty_spline(
+ amplitude_sigma=amplitude_sigma,
+ phase_sigma=phase_sigma,
+ minimum_frequency=frequency_array[0],
+ maximum_frequency=frequency_array[-1],
+ n_nodes=n_nodes,
+ label=label,
+ )
+ parameters = pd.DataFrame(priors.sample(n_curves))
+ curves = curves_from_spline_and_prior(
+ label=label,
+ frequency_array=frequency_array,
+ n_points=n_nodes,
+ parameters=parameters,
+ n_curves=n_curves
+ )
+ return cls(
+ label=label,
+ curves=np.array(curves),
+ frequency_array=frequency_array,
+ parameters=parameters,
+ )
+
+ @classmethod
+ def from_envelope_file(
+ cls, envelope, frequency_array, n_nodes, label, n_curves
+ ):
+ priors = CalibrationPriorDict.from_envelope_file(
+ envelope_file=envelope,
+ minimum_frequency=frequency_array[0],
+ maximum_frequency=frequency_array[-1],
+ n_nodes=n_nodes,
+ label=label,
+ )
+ parameters = pd.DataFrame(priors.sample(n_curves))
+ curves = curves_from_spline_and_prior(
+ label=label,
+ frequency_array=frequency_array,
+ n_points=n_nodes,
+ parameters=parameters,
+ n_curves=n_curves,
+ )
+ return cls(
+ label=label,
+ curves=np.array(curves),
+ frequency_array=frequency_array,
+ parameters=parameters,
+ )
+
+ @classmethod
+ def from_calibration_file(cls, label, filename, frequency_array, n_curves, starting_index=0):
+ curves, parameters = read_calibration_file(
+ filename=filename,
+ frequency_array=frequency_array,
+ number_of_response_curves=n_curves,
+ starting_index=starting_index,
+ )
+ return cls(
+ label=label,
+ curves=np.array(curves),
+ frequency_array=frequency_array,
+ parameters=parameters,
+ )
+
+
def build_calibration_lookup(
interferometers,
lookup_files=None,
@@ -255,6 +358,12 @@ def build_calibration_lookup(
number_of_response_curves,
starting_index,
)
+ elif isinstance(interferometer.calibration_model, Precomputed):
+ model = interferometer.calibration_model
+ idxs = np.arange(number_of_response_curves, dtype=int) + starting_index
+ draws[name] = model.curves[idxs]
+ parameters[name] = pd.DataFrame(model.parameters.iloc[idxs])
+ parameters[name][model.prefix] = idxs
else:
if priors is None:
raise ValueError(
diff --git a/examples/gw_examples/injection_examples/calibration_example.py b/examples/gw_examples/injection_examples/calibration_example.py
index 91629dd47e19f659edb29816ab3d725c161807d4..9f7ceaf623e608e10ccbafe5aafd072d008f65cc 100644
--- a/examples/gw_examples/injection_examples/calibration_example.py
+++ b/examples/gw_examples/injection_examples/calibration_example.py
@@ -5,6 +5,11 @@ uncertainties included.
We set up the full problem as is required and then just sample over a small
number of calibration parameters.
+
+We demonstrate, two formulations of the calibration model:
+- a cubic spline described by gaussian distributions at a set of nodes.
+- a set of precomputed curves, in this example we use cubic spline realizations,
+ however, it also applies to physically motivated models.
"""
import bilby
@@ -62,22 +67,32 @@ waveform_generator = bilby.gw.WaveformGenerator(
# (LIGO-Hanford (H1), LIGO-Livingston (L1), and Virgo (V1)).
# These default to their design sensitivity
ifos = bilby.gw.detector.InterferometerList(["H1", "L1", "V1"])
-for ifo in ifos:
- injection_parameters.update(
- {f"recalib_{ifo.name}_amplitude_{ii}": 0.1 for ii in range(5)}
- )
- injection_parameters.update(
- {f"recalib_{ifo.name}_phase_{ii}": 0.01 for ii in range(5)}
- )
- ifo.calibration_model = bilby.gw.calibration.CubicSpline(
- prefix=f"recalib_{ifo.name}_",
- minimum_frequency=ifo.minimum_frequency,
- maximum_frequency=ifo.maximum_frequency,
- n_points=5,
- )
ifos.set_strain_data_from_power_spectral_densities(
sampling_frequency=sampling_frequency, duration=duration
)
+
+ifo = ifos[0]
+injection_parameters.update(
+ {f"recalib_{ifo.name}_amplitude_{ii}": 0.1 for ii in range(5)}
+)
+injection_parameters.update({f"recalib_{ifo.name}_phase_{ii}": 0.01 for ii in range(5)})
+ifo.calibration_model = bilby.gw.calibration.CubicSpline(
+ prefix=f"recalib_{ifo.name}_",
+ minimum_frequency=ifo.minimum_frequency,
+ maximum_frequency=ifo.maximum_frequency,
+ n_points=5,
+)
+ifo = ifos[1]
+injection_parameters["recalib_index_L1"] = 3
+ifo.calibration_model = bilby.gw.calibration.Precomputed.constant_uncertainty_spline(
+ amplitude_sigma=0.1,
+ phase_sigma=0.01,
+ label="L1",
+ frequency_array=ifo.frequency_array[ifo.frequency_mask],
+ n_nodes=5,
+ n_curves=100,
+)
+
ifos.inject_signal(
parameters=injection_parameters, waveform_generator=waveform_generator
)
@@ -94,6 +109,9 @@ for name in ["recalib_H1_amplitude_0", "recalib_H1_amplitude_1"]:
priors[name] = bilby.core.prior.Gaussian(
mu=0, sigma=0.2, name=name, latex_label=f"H1 $A_{name[-1]}$"
)
+priors["recalib_index_L1"] = bilby.core.prior.Categorical(
+ ncategories=100, latex_label="recalib index L1"
+)
# Initialise the likelihood by passing in the interferometer data (IFOs) and
# the waveform generator
diff --git a/test/gw/likelihood/marginalization_test.py b/test/gw/likelihood/marginalization_test.py
index b8f0aeb1daacc08221efdf51fd3c24b00aadf136..42fa0332fce6c3b1d0f79baa089d5013a16a2729 100644
--- a/test/gw/likelihood/marginalization_test.py
+++ b/test/gw/likelihood/marginalization_test.py
@@ -455,11 +455,13 @@ class CalibrationMarginalization(unittest.TestCase):
maximum_frequency=512,
n_points=5,
)
- self.ifos[1].calibration_model = calibration.CubicSpline(
- prefix="recalib_L1_",
- minimum_frequency=20,
- maximum_frequency=512,
- n_points=5,
+ self.ifos[1].calibration_model = calibration.Precomputed.constant_uncertainty_spline(
+ amplitude_sigma=0.1,
+ phase_sigma=0.1,
+ frequency_array=self.ifos[1].frequency_array[self.ifos[1].frequency_mask],
+ n_nodes=5,
+ label="L1",
+ n_curves=1000,
)
self.priors = bilby.gw.prior.BBHPriorDict()
self.priors["geocent_time"] = bilby.core.prior.Uniform(0, 4)
@@ -471,14 +473,6 @@ class CalibrationMarginalization(unittest.TestCase):
n_nodes=5,
label="H1",
))
- self.priors.update(bilby.gw.prior.CalibrationPriorDict.constant_uncertainty_spline(
- amplitude_sigma=0.1,
- phase_sigma=0.1,
- minimum_frequency=20,
- maximum_frequency=512,
- n_nodes=5,
- label="L1",
- ))
self.wfg = bilby.gw.waveform_generator.WaveformGenerator(
frequency_domain_source_model=bilby.gw.source.lal_binary_black_hole,
parameter_conversion=bilby.gw.conversion.convert_to_lal_binary_black_hole_parameters,
@@ -518,8 +512,7 @@ class CalibrationMarginalization(unittest.TestCase):
for ii in range(100):
for name, value in draws["H1"].items():
non_marginalized.parameters[name] = value[ii]
- for name, value in draws["L1"].items():
- non_marginalized.parameters[name] = value[ii]
+ non_marginalized.parameters["recalib_index_L1"] = draws["L1"]["recalib_index_L1"][ii]
non_marg_ln_ls.append(non_marginalized.log_likelihood_ratio())
non_marg_ln_l = logsumexp(non_marg_ln_ls, b=1 / 100)
self.assertAlmostEqual(marg_ln_l, non_marg_ln_l)