Skip to content
Snippets Groups Projects

Adding a ctest to read simulated data from frames.

Merged Jonathan Hanks requested to merge jonathan-hanks/advligorts:daqd_nds_testing into master
4 files
+ 218
2
Compare changes
  • Side-by-side
  • Inline
Files
4
+ 82
0
set thread_stack_size=10240;
#set cit_40m=1;
set dcu_status_check=1;
#set symm_gps_offset=-1;
#set controller_dcu=22;
set debug=0;
set log=6;
set zero_bad_data=0;
set master_config="MASTER";
configure channels begin end;
#tpconfig "TESTPOINT";
status dcu;
#tpconfig "TESTPOINT";
set gps_leaps = 820108813;
set detector_name="TST";
set detector_prefix="X6";
set detector_longitude=-90.7742403889;
set detector_latitude=30.5628943337;
set detector_elevation=.0;
set detector_azimuths=1.1,4.7123889804;
set detector_altitudes=1.0,2.0;
set detector_midpoints=2000.0, 2000.0;
#enable frame_wiper;
set num_dirs = 10;
set frames_per_dir=225;
set full_frames_per_file=1;
set full_frames_blocks_per_frame=16;
set frame_dir="FRAMES/full", "M-R-", ".gwf";
#scan frames;
#enable trend_frame_wiper;
#set trend_num_dirs=10;
#set trend_frames_per_dir=1440;
#set trend_frame_dir= "/frames/trend/second", "M-T-", ".gwf";
#set raw-minute-trend-dir="/frames/trend/minute/raw";
set nds-jobs-dir="FRAMES/nds";
set parameter "shmem_input" = "local_dc";
set parameter "shmem_size" = "104857600";
#enable minute-trend-frame-wiper;
#set minute-trend-num-dirs=10;
#set minute-trend-frames-per-dir=24;
#set minute-trend-frame-dir="/frames/trend/minute", "M-M-", ".gwf";
#
#scan minute-trend-frames;
#scan trend-frames;
scan frames;
start main 5;
start profiler;
# comment out this block to stop saving data
start frame-saver;
sync frame-saver;
#start trender;
#start trend-frame-saver;
#sync trend-frame-saver;
#start minute-trend-frame-saver;
#sync minute-trend-frame-saver;
#start raw-minute-trend-saver;
#start fast-writer "127.255.255.255" broadcast="127.0.0.0" all;
#sleep 2;
#sleep 5;
start producer;
#start epics dcu;
;start epics server "X3:DAQ-SHM0_" "X3:DAQ-SHM0_";
#start listener 8087;
start listener 8088 1;
# for this test we do not need to clear the crcs
#sleep 60;
#clear crc;
Loading