Post-Install-Setup.md

@@ -51,6 +51,15 @@ It is recommended to copy and paste the command below
 controls@x2fec:/$ sudo apt-get install nfs-common nfs-kernel-server subversion ntpdate dkms build-essential cmake pkg-config psmisc linux-headers-$(uname -r) flex bison ldas-tools-al-dev ldas-tools-framecpp-dev libboost-all-dev git
 ```
 
+# Setup NFS export of /opt/rtcds directory
+The FEC exports the /opt/rtcds directory to the directly connected workstation, insert workstation ip into `<workstation-ip>`. Directions for mounting the NFS mount on the workstation will be included in the workstation setup instructions.**If you are configuring your front-end as a cymac (front-end and workstation on the same host), you can skip this step.** 
+Add the following content to `/etc/exports` and run `/usr/sbin/exportfs -a`. Restart the nfs-server.service.
+```plaintext
+controls@x2fec:/$ sudo cat /etc/exports
+/etc/exports <workstation-ip>(rw,sync,no_subtree_check)
+controls@x2fec:/$ sudo /usr/sbin/exportfs -a
+controls@x2fec:/$ sudo systemctl status nfs-server.service
+```
 # Setup NTP
 
 The front-end needs to be synced to an NTP source. You need to know the address of the local NTP server. At the IFOs, this may be the core router.