Skip to content
Snippets Groups Projects
Commit 472ffb31 authored by Aaron Viets's avatar Aaron Viets
Browse files

gstlal-calibration: Reorganized config_file directories. Likely to be reorganized again...

parent 1304163d
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 724 additions and 2 deletions
gstlal-calibration/config_files/O2/L1/tests/L1DCS_AllCorrections_Cleaning.ini 0 → 100644
+ 361
− 0
View file @ 472ffb31
[InputConfigurations]
# Track what "version" of config file this is, so that the pipeline knows which options are present in this file
ConfigVersion: 0
# Filters file containing calibration FIR filters, relative to the directory gstlal-calibration/tests/check_calibration/, from which the pipeline is expected to be run
FiltersFileName: L1DCS_newsrcline_1175961600.npz
# Data source should be set to frames or lvshm
DataSource: frames
FileChecksum: No
# Right now, SkipBadFiles needs to be off when reading from frames
SkipBadFiles: No
############################################
# If reading from frames use these options #
############################################
# None
###################################################
# If reading from shared memory use these options #
###################################################
SHMPartition: LLO_Online
# Assumed duration of input frames in seconds
InputFrameDuration: 1
[OutputConfigurations]
CompressionScheme: 6
CompressionLevel: 3
ChanPrefix: DCS-
# Set to "None" if you do not want a channel suffix
ChanSuffix: None
# Data sink should be set to frames or lvshm
DataSink: frames
#################################################
# If writing to shared memory use these options #
#################################################
OutputSHMPartition: hoft_test
BufferMode: 2
# Use this to approximate the frame size (in bytes) when writing to shared memory
FrameSize: 405338
NumBuffers: 10
###############################################
# If writing to frame files use these options #
###############################################
FrameType: L1DCS_TEST
[CalibrationConfigurations]
IFO: L1
# Set calibration mode to Full or Partial
CalibrationMode: Full
ComputeCalibStateVector: Yes
[DebuggingConfigurations]
# If you want to write a pipeline graph, provide the graph name. Otherwise, set name equal to None
PipelineGraphFilename: gstlal_compute_strain
Verbose: Yes
# Turn this on to write data presentation timestamps and real-time unix timestamps to file at the beginning and end of the pipeline, to measure latency
TestLatency: No
[TDCFConfigurations]
#########################################################
# Options related to time dependent correction factors #
#########################################################
ComputeKappaTST: Yes
ApplyKappaTST: No
# Set this to have the \kappa_tst factors filter the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaTST: Yes
ComputeKappaPU: Yes
ApplyKappaPU: No
# Set this to have the \kappa_pu factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors
ApplyComplexKappaPU: Yes
ComputeKappaPUM: No
ApplyKappaPUM: No
# Set this to have the \kappa_p factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaPUM: No
ComputeKappaUIM: No
ApplyKappaUIM: No
# Set this to have the \kappa_u factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaUIM: No
# Set this to use a calibration line injected using the UIM stage of actuation to compute \kappa_U. Otherwise, the DARM_ctrl line is used.
UseUIMLine: No
ComputeKappaC: Yes
ApplyKappaC: Yes
ComputeFcc: Yes
ApplyFcc: Yes
ComputeSRCQ: Yes
ApplySRCQ: Yes
ComputeFs: Yes
ApplyFs: Yes
###########################################
# Options related to the coherence gating #
###########################################
UseCoherence: Yes
CoherenceUncThreshold: 0.004
# Amount of time used in front-end to compute coherence
CoherenceTime: 130
###################################################################
# Options related to the computation configurations for the TDCFs #
###################################################################
ComputeFactorsSR: 16
RecordFactorsSR: 16
# Length in seconds of low-pass FIR filter used in demodulation of the calibration lines
DemodulationFilterTime: 20
# Time (in seconds) to smooth out \kappas with a median-like method
MedianSmoothingTime: 128
TDCFAveragingTime: 10
#If set to yes, bad computed kappas will be replaced by the previous computed median in the running median array. Otherwise, they are replaced with the default value
TDCFDefaultToMedian: Yes
##################################################
# Options related to updating cavity pole filter #
##################################################
# Duration of the Fcc filter in the time domain in seconds
FccFilterDuration: 0.01
# Number of seconds to average Fcc values before creating a new Fcc filter
FccAveragingTime: 60
# Number of samples to be used when tapering old filter and ramping in new filter
FccFilterTaperLength: 32768
############################
# Nominal values for TDCFs #
############################
ExpectedKappaTSTReal: 1.0
ExpectedKappaTSTImag: 0.0
ExpectedKappaPUMReal: 1.0
ExpectedKappaPUMImag: 0.0
ExpectedKappaUIMReal: 1.0
ExpectedKappaUIMImag: 0.0
ExpectedKappaPUReal: 1.0
ExpectedKappaPUImag: 0.0
ExpectedKappaC: 1.0
ExpectedFcc: 376.0
ExpectedFs: 0.0
ExpectedSRCQ: 10000.0
################################
# Acceptable variance in TDCFs #
################################
KappaTSTRealVar: 0.2
KappaTSTImagVar: 0.2
KappaPURealVar: 0.2
KappaPUImagVar: 0.2
KappaPUMRealVar: 0.2
KappaPUMImagVar: 0.2
KappaUIMRealVar: 0.2
KappaUIMImagVar: 0.2
KappaCVar: 0.2
FccVar: 50.0
FsVar: 5.0
SRCQInvMin: 0.0
SRCQInvMax: 0.5
#######################
# EPICS records input #
#######################
# Set to Yes if EPICS records for TDCF computations should be read from filters file. If set to No, they will be read from frames
FactorsFromFiltersFile: Yes
##############################################################################################
# Updating Sensing and Actuation filters with all frequency-dependent corrections parameters #
##############################################################################################
# Length of time (in seconds) between when inverse-sensing FIR filter is updated
SensingFilterUpdateTime: 60
# Length of time (in seconds) over which the smoothed time-dependent parameters of the sensing function are averaged before updating the filter
SensingFilterAveragingTime: 1
# Number of samples to be used when tapering old inverse sensing filter and ramping in new filter
SensingFilterTaperLength: 32768
# Length of time (in seconds) between when the actuation FIR filters are updated
ActuationFilterUpdateTime: 60
# Length of time (in seconds) over which the smoothed time-dependent parameters of the actuation function are averaged before updating the filter
ActuationFilterAveragingTime: 1
# Number of samples to be used when tapering old actuation filters and ramping in new filters
ActuationFilterTaperLength: 32768
[ChannelNames]
#############################
# Calibration Channel Names #
#############################
DARMCtrlChannel: CAL-DARM_CTRL_WHITEN_OUT_DBL_DQ
DARMErrChannel: CAL-DARM_ERR_WHITEN_OUT_DBL_DQ
DeltaLTSTChannel: CAL-DELTAL_CTRL_TST_DBL_DQ
DeltaLPUMChannel: CAL-DELTAL_CTRL_PUM_DBL_DQ
DeltaLUIMChannel: CAL-DELTAL_CTRL_UIM_DBL_DQ
DeltaLResChannel: CAL-DELTAL_RESIDUAL_DBL_DQ
####################################
# Data Quality Vector Channel Name #
####################################
InputDQChannel: ODC-MASTER_CHANNEL_OUT_DQ
##################################
# Calibration Line Channel Names #
##################################
DARMExcChannel: CAL-CS_LINE_SUM_DQ
TSTExcChannel: SUS-ETMY_L3_CAL_LINE_OUT_DQ
PUMExcChannel: SUS-ETMY_L2_CAL_LINE_OUT_DQ
UIMExcChannel: SUS-ETMY_L1_CAL_LINE_OUT_DQ
PCALChannel: CAL-PCALY_RX_PD_OUT_DQ
#######################################
# Coherence Uncertainty Channel Names #
#######################################
CohUncSusLine1Channel: CAL-CS_TDEP_SUS_LINE1_UNCERTAINTY
CohUncPcalyLine1Channel: CAL-CS_TDEP_PCALY_LINE1_UNCERTAINTY
CohUncPcalyLine2Channel: CAL-CS_TDEP_PCALY_LINE2_UNCERTAINTY
CohUncDARMLine1Channel: CAL-CS_TDEP_DARM_LINE1_UNCERTAINTY
###################################
# Noise Subtraction Channel Names #
###################################
PowerLinesChannel: PEM-EY_MAINSMON_EBAY_1_DQ
# Comma-separated list of witness channels to use to subtract noise from h(t)
# Set to None if no witness channels are to be used
WitnessChannelList: IMC-WFS_A_DC_PIT_OUT_DQ,IMC-WFS_B_DC_PIT_OUT_DQ,IMC-WFS_A_DC_YAW_OUT_DQ,IMC-WFS_B_DC_YAW_OUT_DQ
###############################
# EPICS Records Channel Names #
###############################
EP1RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_REAL
EP1ImagChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_IMAG
EP2RealChannel: CAL-CS_TDEP_REF_CLGRATIO_CTRL_REAL
EP2ImagChannel: CAL-CS_TDEP_REF_CLGRATIO_CTRL_IMAG
EP3RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_REAL
EP3ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_IMAG
EP4RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_TST_REAL
EP4ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_TST_IMAG
EP5RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_REAL
EP5ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_IMAG
EP6RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_REAL
EP6ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_IMAG
EP7RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_D_REAL
EP7ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_D_IMAG
EP8RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_REAL
EP8Imagchannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_IMAG
EP9RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_REAL
EP9ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_IMAG
EP10RealChannel: CAL-CS_TDEP_ESD_LINE1_REF_A_TST_NOLOCK_REAL
EP10ImagChannel: CAL-CS_TDEP_ESD_LINE1_REF_A_TST_NOLOCK_IMAG
EP11RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_C_NOCAVPOLE_REAL
EP11ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_C_NOCAVPOLE_IMAG
EP12RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_D_REAL
EP12ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_D_IMAG
EP13RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_TST_REAL
EP13ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_TST_IMAG
EP14RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_USUM_REAL
EP14ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_USUM_IMAG
EP15RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_PUM_REAL
EP15Imagchannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_PUM_IMAG
EP16RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_UIM_INV_REAL
EP16ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_UIM_INV_IMAG
EP17RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_PUM_REAL
EP17ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_PUM_IMAG
EP18RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_PUM_REAL
EP18ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_PUM_IMAG
EP19RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_UIM_REAL
EP19ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_UIM_IMAG
EP20RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_PUM_REAL
EP20ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_PUM_IMAG
EP21RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_UIM_REAL
EP21ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_UIM_IMAG
EP22RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_UIM_REAL
EP22ImagChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_UIM_IMAG
EP23RealChannel: CAL-CS_TDEP_PUM_LINE1_REF_A_PUM_NOLOCK_REAL
EP23ImagChannel: CAL-CS_TDEP_PUM_LINE1_REF_A_PUM_NOLOCK_IMAG
EP24RealChannel: CAL-CS_TDEP_UIM_LINE1_REF_A_UIM_NOLOCK_REAL
EP24ImagChannel: CAL-CS_TDEP_UIM_LINE1_REF_A_UIM_NOLOCK_IMAG
[SampleRates]
# Sample rate at which to compute h(t)
HoftSR: 16384
# Sample rate at which to compute CALIB_STATE_VECTOR
CalibStateSR: 16
# Sample rate of control channel
# Should be 16384 if using DARM_CTRL and 4096 if using DELTAL_CTRL
CtrlSR: 16384
# Sample rate of ODC channel
ODCSR: 16384
# Sample rate of TST excitation channel
TSTExcSR: 512
# Sample rate of PUM excitation channel
PUMExcSR: 512
# Sample rate of UIM excitation channel
UIMExcSR: 512
# Sample rate of coherence channels
CohSR: 16
# Sample rate for the EPICS reference channels
EPICSRefSR: 16
# Sample rate for power lines channel
PowerLinesChannelSR: 1024
# Sample rates at which transfer functions will be computed and witness channels will be filtered, given as a semicolon-separated list, e.g., 2048;2048;512;2048. This must be given if WitnessChannelList is not None, and it must be the same length.
WitnessChannelSR: 2048
# Sample rates at which to compute and record TDCFs
ComputeFactorsSR: 16
RecordFactorsSR: 16
[Bitmasks]
ObsReadyBitmask: 4
ObsIntentBitmask: 2
CBCHWInjBitmask: 16777216
BurstHWInjBitmask: 33554432
DetCharHWInjBitmask: 67108864
StochHWInjBitmask: 8388608
[PipelineConfigurations]
BufferLength: 1.0
FrequencyDomainFiltering: No
Dewhitening: No
# Latency of all filtering/averaging/median processes (other than calibration model filters) as a fraction of filter length. Value should be set between 0.0 and 1.0.
FilterLatency: 0.0
[DataCleaningConfigurations]
####################################################
# Options for turning on and off line subtraction #
####################################################
# Remove the DC component from the residual and control channels before filtering
RemoveDC: No
# Subtract the calibration lines from the h(t) spectrum
RemoveCalLines: Yes
# Subtract the power lines from the h(t) spectrum
RemovePowerLines: Yes
####################################################
# Options for running power mains line subtraction #
####################################################
# Amount by which frequency of power lines varies with time
PowerLinesFreqVar: 0.02
# Time over which to average the transfer function between the power mains witness channel and h(t) at 60 Hz and harmonics
PowerLinesTFAveragingTime: 128
#######################################
# Options for broadband noise removal #
#######################################
# The length in seconds of the fast Fourier transforms used to compute transfer functions between witness channels and h(t). The fft's are windowed with Hann windows and overlapped.
WitnessChannelFFTTime: 4.0
# The number of ffts to take before averaging the witness -> h(t) transfer functions calculation. The average is taken after the ratio h(f) / witness(f).
NumWitnessFFTs: 1800
# Sets the minimum number of FFTs necessary to produce the first transfer functions and clean data after data flow starts.
MinWitnessFFTs: 400
# The length in seconds of the filters applied to the witness channels before subtracting from h(t)
WitnessFIRLength: 0.5
# The frequency resolution of the filters applied to the witness channels before subtracting from h(t). It can be advantageous to lower the frequency resolution in order to average over excess noise.
WitnessFrequencyResolution: 1.0
# List of minima and maxima of frequency ranges where the Fourier transform of h(t) will be replaced by a straight line in the calculation of transfer functions between witness channels and h(t) for noise subtraction. Semicolons separate lists for different sets of witness channels. If no notches are desired, use zeros, e.g., \'0;0;0\'. Here is an example using the expected format: \'495.0,515.0,985.0,1015.0;59,60,119,121;0\' This can be useful, e.g., if there are loud lines in the signal that are not present in the witness channels.
WitnessNotchFrequencies: 495.0,515.0,985.0,1015.0
# The amount of time after transfer functions between witness channels and h(t) are finished to begin the calculation of the next set of transfer functions
WitnessTFUpdateTime: 3600
# If lock-loss lasts at least this many seconds, transfer functions will revert to those computed at the beginning of a lock stretch. Set to zero to disbale.
CriticalLockLossTime: 1800
# The amount of time to use to taper in newly computed FIR filters for witness channels being used for noise subtraction.
WitnessFilterTaperTime: 10
# If writing transfer functions to file, this sets the name. If transfer functions should not be written to file, this should be set to None
WitnessTFFilename: None
# Should the transfer function calculation use a median? If not, an average (mean) is used.
WitnessTFUseMedian: Yes
###############################
# Options for HOFT_CLEAN bits #
###############################
# The amount of data from h(t) and cleaned h(t) that is used to compute and compare the rms. This comparison between cleaned and uncleaned h(t) determines whether the HOFT_CLEAN bits of the calibration state vector are on or off.
CleaningCheckRMSTime: 20.0
# Minimum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_LOWFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeLowMin: 15
# Maximum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_LOWFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeLowMax: 40
# Minimum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_MIDFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeMidMin: 100
# Maximum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_MIDFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeMidMax: 500
gstlal-calibration/config_files/PreER13/L1/tests/L1GDS_TestLatency_AllCorrections_Cleaning.ini 0 → 100644
+ 361
− 0
View file @ 472ffb31
[InputConfigurations]
# Track what "version" of config file this is, so that the pipeline knows which options are present in this file
ConfigVersion: 0
# Filters file containing calibration FIR filters
FiltersFileName: L1GDS_1175954418.npz
# Data source should be set to frames or lvshm
DataSource: lvshm
FileChecksum: No
# Right now, SkipBadFiles needs to be off when reading from frames
SkipBadFiles: No
############################################
# If reading from frames use these options #
############################################
# None
###################################################
# If reading from shared memory use these options #
###################################################
SHMPartition: LLO_Online
# Assumed duration of input frames in seconds
InputFrameDuration: 1
[OutputConfigurations]
CompressionScheme: 6
CompressionLevel: 3
ChanPrefix: GDS-
# Set to "None" if you do not want a channel suffix
ChanSuffix: None
# Data sink should be set to frames or lvshm
DataSink: frames
#################################################
# If writing to shared memory use these options #
#################################################
OutputSHMPartition: hoft_test
BufferMode: 2
# Use this to approximate the frame size (in bytes) when writing to shared memory
FrameSize: 405338
NumBuffers: 10
###############################################
# If writing to frame files use these options #
###############################################
FrameType: L1GDS_SHM
[CalibrationConfigurations]
IFO: H1
# Set calibration mode to Full or Partial
CalibrationMode: Partial
ComputeCalibStateVector: Yes
[DebuggingConfigurations]
# If you want to write a pipeline graph, provide the graph name. Otherwise, set name equal to None
PipelineGraphFilename: gstlal_compute_strain
Verbose: Yes
# Turn this on to write data presentation timestamps and real-time unix timestamps to file at the beginning and end of the pipeline, to measure latency
TestLatency: Yes
[TDCFConfigurations]
#########################################################
# Options related to time dependent correction factors #
#########################################################
ComputeKappaTST: Yes
ApplyKappaTST: No
# Set this to have the \kappa_tst factors filter the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaTST: Yes
ComputeKappaPU: Yes
ApplyKappaPU: No
# Set this to have the \kappa_pu factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors
ApplyComplexKappaPU: Yes
ComputeKappaPUM: No
ApplyKappaPUM: No
# Set this to have the \kappa_p factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaPUM: No
ComputeKappaUIM: No
ApplyKappaUIM: No
# Set this to have the \kappa_u factors the actuation chain with an adaptive filter that corrects for both magnitude and phase errors.
ApplyComplexKappaUIM: No
# Set this to use a calibration line injected using the UIM stage of actuation to compute \kappa_U. Otherwise, the DARM_ctrl line is used.
UseUIMLine: No
ComputeKappaC: Yes
ApplyKappaC: Yes
ComputeFcc: Yes
ApplyFcc: Yes
ComputeSRCQ: No
ApplySRCQ: No
ComputeFs: No
ApplyFs: No
###########################################
# Options related to the coherence gating #
###########################################
UseCoherence: Yes
CoherenceUncThreshold: 0.004
# Amount of time used in front-end to compute coherence
CoherenceTime: 130
###################################################################
# Options related to the computation configurations for the TDCFs #
###################################################################
ComputeFactorsSR: 16
RecordFactorsSR: 16
# Length in seconds of low-pass FIR filter used in demodulation of the calibration lines
DemodulationFilterTime: 20
# Time (in seconds) to smooth out \kappas with a median-like method
MedianSmoothingTime: 128
TDCFAveragingTime: 10
#If set to yes, bad computed kappas will be replaced by the previous computed median in the running median array. Otherwise, they are replaced with the default value
TDCFDefaultToMedian: Yes
##################################################
# Options related to updating cavity pole filter #
##################################################
# Duration of the Fcc filter in the time domain in seconds
FccFilterDuration: 0.01
# Number of seconds to average Fcc values before creating a new Fcc filter
FccAveragingTime: 60
# Number of samples to be used when tapering old filter and ramping in new filter
FccFilterTaperLength: 32768
############################
# Nominal values for TDCFs #
############################
ExpectedKappaTSTReal: 1.0
ExpectedKappaTSTImag: 0.0
ExpectedKappaPUMReal: 1.0
ExpectedKappaPUMImag: 0.0
ExpectedKappaUIMReal: 1.0
ExpectedKappaUIMImag: 0.0
ExpectedKappaPUReal: 1.0
ExpectedKappaPUImag: 0.0
ExpectedKappaC: 1.0
ExpectedFcc: 376.0
ExpectedFs: 0.01
ExpectedSRCQ: 10000
################################
# Acceptable variance in TDCFs #
################################
KappaTSTRealVar: 0.2
KappaTSTImagVar: 0.2
KappaPURealVar: 0.2
KappaPUImagVar: 0.2
KappaPUMRealVar: 0.2
KappaPUMImagVar: 0.2
KappaUIMRealVar: 0.2
KappaUIMImagVar: 0.2
KappaCVar: 0.2
FccVar: 50.0
FsVar: 5.0
SRCQInvMin: 0.0
SRCQInvMax: 0.5
#######################
# EPICS records input #
#######################
# Set to Yes if EPICS records for TDCF computations should be read from filters file. If set to No, they will be read from frames
FactorsFromFiltersFile: Yes
##############################################################################################
# Updating Sensing and Actuation filters with all frequency-dependent corrections parameters #
##############################################################################################
# Length of time (in seconds) between when inverse-sensing FIR filter is updated
SensingFilterUpdateTime: 60
# Length of time (in seconds) over which the smoothed time-dependent parameters of the sensing function are averaged before updating the filter
SensingFilterAveragingTime: 1
# Number of samples to be used when tapering old inverse sensing filter and ramping in new filter
SensingFilterTaperLength: 32768
# Length of time (in seconds) between when the actuation FIR filters are updated
ActuationFilterUpdateTime: 60
# Length of time (in seconds) over which the smoothed time-dependent parameters of the actuation function are averaged before updating the filter
ActuationFilterAveragingTime: 1
# Number of samples to be used when tapering old actuation filters and ramping in new filters
ActuationFilterTaperLength: 32768
[ChannelNames]
#############################
# Calibration Channel Names #
#############################
DARMCtrlChannel: CAL-DARM_CTRL_WHITEN_OUT_DBL_DQ
DARMErrChannel: CAL-DARM_ERR_WHITEN_OUT_DBL_DQ
DeltaLTSTChannel: CAL-DELTAL_CTRL_TST_DBL_DQ
DeltaLPUMChannel: CAL-DELTAL_CTRL_PUM_DBL_DQ
DeltaLUIMChannel: CAL-DELTAL_CTRL_UIM_DBL_DQ
DeltaLResChannel: CAL-DELTAL_RESIDUAL_DBL_DQ
####################################
# Data Quality Vector Channel Name #
####################################
InputDQChannel: ODC-MASTER_CHANNEL_OUT_DQ
##################################
# Calibration Line Channel Names #
##################################
DARMExcChannel: CAL-CS_LINE_SUM_DQ
TSTExcChannel: SUS-ETMY_L3_CAL_LINE_OUT_DQ
PUMExcChannel: SUS-ETMY_L2_CAL_LINE_OUT_DQ
UIMExcChannel: SUS-ETMY_L1_CAL_LINE_OUT_DQ
PCALChannel: CAL-PCALY_RX_PD_OUT_DQ
#######################################
# Coherence Uncertainty Channel Names #
#######################################
CohUncSusLine1Channel: CAL-CS_TDEP_SUS_LINE1_UNCERTAINTY
CohUncPcalyLine1Channel: CAL-CS_TDEP_PCALY_LINE1_UNCERTAINTY
CohUncPcalyLine2Channel: CAL-CS_TDEP_PCALY_LINE2_UNCERTAINTY
CohUncDARMLine1Channel: CAL-CS_TDEP_DARM_LINE1_UNCERTAINTY
###################################
# Noise Subtraction Channel Names #
###################################
PowerLinesChannel: PEM-EY_MAINSMON_EBAY_1_DQ
# Comma-separated list of witness channels to use to subtract noise from h(t)
# Set to None if no witness channels are to be used
WitnessChannelList: IMC-WFS_A_DC_PIT_OUT_DQ,IMC-WFS_B_DC_PIT_OUT_DQ,IMC-WFS_A_DC_YAW_OUT_DQ,IMC-WFS_B_DC_YAW_OUT_DQ;PSL-DIAG_BULLSEYE_YAW_OUT_DQ,PSL-DIAG_BULLSEYE_WID_OUT_DQ,PSL-DIAG_BULLSEYE_PIT_OUT_DQ
###############################
# EPICS Records Channel Names #
###############################
EP1RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_REAL
EP1ImagChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_IMAG
EP2RealChannel: CAL-CS_TDEP_REF_CLGRATIO_CTRL_REAL
EP2ImagChannel: CAL-CS_TDEP_REF_CLGRATIO_CTRL_IMAG
EP3RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_REAL
EP3ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_IMAG
EP4RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_TST_REAL
EP4ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_TST_IMAG
EP5RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_REAL
EP5ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_IMAG
EP6RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_REAL
EP6ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_IMAG
EP7RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_D_REAL
EP7ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_D_IMAG
EP8RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_REAL
EP8Imagchannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_IMAG
EP9RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_REAL
EP9ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_IMAG
EP10RealChannel: CAL-CS_TDEP_ESD_LINE1_REF_A_TST_NOLOCK_REAL
EP10ImagChannel: CAL-CS_TDEP_ESD_LINE1_REF_A_TST_NOLOCK_IMAG
EP11RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_C_NOCAVPOLE_REAL
EP11ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_C_NOCAVPOLE_IMAG
EP12RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_D_REAL
EP12ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_D_IMAG
EP13RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_TST_REAL
EP13ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_TST_IMAG
EP14RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_USUM_REAL
EP14ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_USUM_IMAG
EP15RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_PUM_REAL
EP15Imagchannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_PUM_IMAG
EP16RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_UIM_INV_REAL
EP16ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_UIM_INV_IMAG
EP17RealChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_PUM_REAL
EP17ImagChannel: CAL-CS_TDEP_DARM_LINE1_REF_A_PUM_IMAG
EP18RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_PUM_REAL
EP18ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_PUM_IMAG
EP19RealChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_UIM_REAL
EP19ImagChannel: CAL-CS_TDEP_PCALY_LINE2_REF_A_UIM_IMAG
EP20RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_PUM_REAL
EP20ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_PUM_IMAG
EP21RealChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_UIM_REAL
EP21ImagChannel: CAL-CS_TDEP_PCALY_LINE4_REF_A_UIM_IMAG
EP22RealChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_UIM_REAL
EP22ImagChannel: CAL-CS_TDEP_REF_INVA_CLGRATIO_UIM_IMAG
EP23RealChannel: CAL-CS_TDEP_PUM_LINE1_REF_A_PUM_NOLOCK_REAL
EP23ImagChannel: CAL-CS_TDEP_PUM_LINE1_REF_A_PUM_NOLOCK_IMAG
EP24RealChannel: CAL-CS_TDEP_UIM_LINE1_REF_A_UIM_NOLOCK_REAL
EP24ImagChannel: CAL-CS_TDEP_UIM_LINE1_REF_A_UIM_NOLOCK_IMAG
[SampleRates]
# Sample rate at which to compute h(t)
HoftSR: 16384
# Sample rate at which to compute CALIB_STATE_VECTOR
CalibStateSR: 16
# Sample rate of control channel
# Should be 16384 if using DARM_CTRL and 4096 if using DELTAL_CTRL
CtrlSR: 4096
# Sample rate of ODC channel
ODCSR: 16384
# Sample rate of TST excitation channel
TSTExcSR: 512
# Sample rate of PUM excitation channel
PUMExcSR: 512
# Sample rate of UIM excitation channel
UIMExcSR: 512
# Sample rate of coherence channels
CohSR: 16
# Sample rate for the EPICS reference channels
EPICSRefSR: 16
# Sample rate for power lines channel
PowerLinesChannelSR: 1024
# Sample rates at which transfer functions will be computed and witness channels will be filtered, given as a semicolon-separated list, e.g., 2048;2048;512;2048. This must be given if WitnessChannelList is not None, and it must be the same length.
WitnessChannelSR: 2048;2048
# Sample rates at which to compute and record TDCFs
ComputeFactorsSR: 16
RecordFactorsSR: 16
[Bitmasks]
ObsReadyBitmask: 4
ObsIntentBitmask: 2
CBCHWInjBitmask: 16777216
BurstHWInjBitmask: 33554432
DetCharHWInjBitmask: 67108864
StochHWInjBitmask: 8388608
[PipelineConfigurations]
BufferLength: 1.0
FrequencyDomainFiltering: No
Dewhitening: No
# Latency of all filtering/averaging/median processes (other than calibration model filters) as a fraction of filter length. Value should be set between 0.0 and 1.0.
FilterLatency: 0.0
[DataCleaningConfigurations]
####################################################
# Options for turning on and off noise subtraction #
####################################################
# Remove the DC component from the residual and control channels before filtering
RemoveDC: No
# Subtract the calibration lines from the h(t) spectrum
RemoveCalLines: Yes
# Subtract the power lines from the h(t) spectrum
RemovePowerLines: Yes
#########################################
# Options for running noise subtraction #
#########################################
# Amount by which frequency of power lines varies with time
PowerLinesFreqVar: 0.02
# Time over which to average the transfer function between the power mains witness channel and h(t) at 60 Hz and harmonics
PowerLinesTFAveragingTime: 128
#######################################
# Options for broadband noise removal #
#######################################
# The length in seconds of the fast Fourier transforms used to compute transfer functions between witness channels and h(t). The fft's are windowed with Hann windows and overlapped.
WitnessChannelFFTTime: 4.0
# The number of ffts to take before averaging the witness -> h(t) transfer functions calculation. The average is taken after the ratio h(f) / witness(f).
NumWitnessFFTs: 1800
# Sets the minimum number of FFTs necessary to produce the first transfer functions and clean data after data flow starts.
MinWitnessFFTs: 400
# The length in seconds of the filters applied to the witness channels before subtracting from h(t)
WitnessFIRLength: 0.5
# The frequency resolution of the filters applied to the witness channels before subtracting from h(t). It can be advantageous to lower the frequency resolution in order to average over excess noise.
WitnessFrequencyResolution: 1.0
# List of minima and maxima of frequency ranges where the Fourier transform of h(t) will be replaced by a straight line in the calculation of transfer functions between witness channels and h(t) for noise subtraction. Semicolons separate lists for different sets of witness channels. If no notches are desired, use zeros, e.g., \'0;0;0\'. Here is an example using the expected format: \'495.0,515.0,985.0,1015.0;59,60,119,121;0\' This can be useful, e.g., if there are loud lines in the signal that are not present in the witness channels.
WitnessNotchFrequencies: 495.0,515.0,985.0,1015.0;495.0,515.0,985.0,1015.0
# The amount of time after transfer functions between witness channels and h(t) are finished to begin the calculation of the next set of transfer functions
WitnessTFUpdateTime: 3600
# If lock-loss lasts at least this many seconds, transfer functions will revert to those computed at the beginning of a lock stretch. Set to zero to disbale.
CriticalLockLossTime: 1800
# The amount of time to use to taper in newly computed FIR filters for witness channels being used for noise subtraction.
WitnessFilterTaperTime: 10
# If writing transfer functions to file, this sets the name. If transfer functions should not be written to file, this should be set to None
WitnessTFFilename: None
# Should the transfer function calculation use a median? If not, an average (mean) is used.
WitnessTFUseMedian: Yes
###############################
# Options for HOFT_CLEAN bits #
###############################
# The amount of data from h(t) and cleaned h(t) that is used to compute and compare the rms. This comparison between cleaned and uncleaned h(t) determines whether the HOFT_CLEAN bits of the calibration state vector are on or off.
CleaningCheckRMSTime: 20.0
# Minimum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_LOWFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeLowMin: 15
# Maximum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_LOWFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeLowMax: 40
# Minimum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_MIDFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeMidMin: 100
# Maximum of a range of frequencies in which we expect line/noise subtraction to be impactful. The HOFT_CLEAN_MIDFREQ_OK bit of the calibration state vector is determined based on whether rms of the cleaned data is less than that of uncleaned h(t) in this range.
CleaningCheckRangeMidMax: 500
gstlal-calibration/tests/check_calibration/Makefile
+ 2
− 2
View file @ 472ffb31
......@@ -8,8 +8,8 @@ IFO = L
# determines where to look for filters files (e.g., O1, O2, O3, ER10, ER13, ER14, PreER10, PreER13, PreER14)
OBSRUN = O2
START = 1186159040
END = 1186162112
START = 1183248000
END = 1183252096
SHMRUNTIME = 400
# How much time does the calibration need to settle at the start and end?
PLOT_WARMUP_TIME = 220
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment