Open
Milestone
advligorts 5.4
Unstarted Issues (open and unassigned)
15
- DAC kill bit is cleared when DK is still asserted in model
- We should add a way for the CDSRFM to verify adapter to IFO leg mapping, before it forwards IPCs around.
- Add timing locked check when using LIGO PCI timing card.
- The SDF table could use better visuals around the data type of the channel.
- 4x decimation filter has zeros on the right side of the plane
- Spectral Leakage in Demod Rotation parts
- adcparser.py parser needs improvement
- DACs with fewer channels still have EPICS channels for 16
- Enable setting of high-speed ADCs to different clock speeds
- Control models should't need to know the card number for DACs/ADCs
- Filter bank computation (via biquad method) shows different character with EPICs gain vs. Filter Module Gain
- strange DAC behavior in h1tcscs
- Timing errors should be more understantable.
- Miscellaneous medm issues
- Mux and Buses Have Different Functionality Depending On Which Level They're Demuxed / Selected
Ongoing Issues (open and assigned)
11
- RCG should check the DAC kill list of cards vs the number of DACs it has.
- Phase RCG Parts should have all slow channels in EPICS.
- Dolphin DMA testing and PCIE IPCs to FE local models.
- Update the *DAQ_BYTE_COUNT HIHI feild so we don't go yellow/red at 4000 bytes anymore.
- Consolidate /burt directory expected permissions between LHO and LLO
- cps_xmit and recv send too many headers which inflates the required bandwidth
- Standalone_edc does not have a way of reporting subscribed channels that are in an error state
- Remove support for LDD_SEC_ON_START/lhomid
- daqd raw minute trends should require less manual maintenance for cymacs
- Add an auto-detect model mode to local_dc for cymac support
- advligorts-cymac package needs dependency on fuser
Completed Issues (closed)
10
- Non Dolphin model with Dolphin IPCs fails to load with new IPC wait changes.
- Report long dolphin access times
- Installer should zip up <model>_core.c and other related files so they are archived.
- The RCG should emit more structured data about the model's IPCs and filter modules, so we don't need as many one-off scripts.
- libRTS Should allow the model's log level to be set
- ModuleIOP.symvers should be linked by configure.ac instead of copied
- Model build should fail if you don't start with ADC0 block in user model
- Dolphin Issues on IX/PX Deb10/11
- Possibly allow models to run if dolphin disconnected.
- Precision errors in the SDF monitoring
Loading
Loading
Loading